LP Acid CIP is a highly concentrated low foaming acid designed for neutralization of caustic cleaners and removal of mineral deposits in CIP systems as well as other areas. The acid blend of LP Acid CIP will not harm the passive coating of stainless steel equipment. Passivation is a process that protects the stainless steel from degradation. LP Acid CIP is a USDA A3 product.
Physical Properties
| Appearance: | Clear Liquid |
|---|---|
| Density: | 9.95 lbs/gal |
| pH: | 1.0 @ 2% |
Use Procedure
| Concentration: | 3%-10% for descaling. As needed for caustic neutralization. |
|---|---|
| Temperature: | Ambient to 150˚F |
| Process Method: | Soak, Boil-Outs, CIP |
| Cycle Time: | Depends on application and degree of scale buildup. |
Product Benefits
- Multiple Product Uses
- Very Low Foam
- Easily Rinsed
- Safe on Stainless Steel
- Biodegradable
Product Safety Information
Contains Phosphoric Acid and Nitric acid. Avoid contact with skin and eyes. DO NOT INGEST. When handling, wear rubber gloves, goggles and other appropriate equipment or clothing to avoid skin contact. Avoid contact with clothing. Should contact occur, flush skin with water; for eyes, flood with large amounts of water for 15 minutes and get medical attention. If ingestion occurs, DO NOT INDUCE VOMITING. Rinse mouth, drink water and get medical attention immediately. Read the Safety Data sheet before using. Use in well ventilated area. Do not mix with chlorinated products.